News For This Month: Builders

Things that You Have to Understand About Log Home Builder Kits

The first decision that you must make when you are thinking about using the log home kits for building a log home is the construction method. You can choose the saddle notch method or you may go for the butt-and-pass method. Each style refers to the way wherein the home is joined at the corners.

You must know that such saddle notch method would require the builders to cut a notch in the log that fits a perpendicular log that will be placed on top of this. Logs are then stacked in a fashion to build a wall and the weight of the logs are going to make the lock lightly and create such secure corners. There are some builders which drive a bolt or stake through the logs in order to add security.

With the butt-and-pass method, the perpendicular log is then butted against the existing log as the stacking of log starts. On the second level of stacking, the log would pass over the first perpendicular log. On the third level, the log is going to butt up against such perpendicular log. Such stacking is going to continue until you finish the wall.
5 Key Takeaways on the Road to Dominating Services

Know that such butt-and-pass method that is used with log home kits would make spacing between the logs which have to be filled with chinking and insulation, which is a method which equates to caulking the log home. The logs are secured with stakes and bolts driven down from one log to the next.
Practical and Helpful Tips: Houses

Know that the saddle notch method is naturally more expensive for the homebuyers and the builders. One of the reasons is due to the amount of precision to have the logs aligned properly. This would take careful measuring so that the logs will be cut at the right inch specifications so that the perpendicular log can fit into the groove and make such tight corner.

Even if some of the companies are claiming to use the butt-and-pass method for the log home kits, there are critics that have contended this type of method is not possible using the kit. The kits are being manufactured in other areas and they are being shipped for assembly on the property. Some of the builders have also claimed that the butt-and-pass method is sturdy and this cannot be shipped in parts and be reassembled.

A challenge which many homeowners purchasing the log home builder kits face is the settling which happens after assembly. This is one natural process which forces some parts of the house to fall out of the alignment about a year or so after the logs have totally dried up.